21 a 30 de 1.045 Resultados
11 nov 2025 - Green hydrogen production from waste biomass pyrolysis fractions by auto-thermal reforming in a membrane reactor BIOWASTETOH2
Chirinos Chavez, Carlos Andres; Vizcaíno, Arturo; Calles, Jose A; CARRERO, ALICIA; MEGIA, Pedro J., 2027, "Valorization of bio-oil aqueous fractions through oxidative steam reforming over Co/CeO2-SBA-15 catalysts: from single model compounds to complex mixtures", https://doi.org/10.21950/LPVFCN, e-cienciaDatos, V1
This study investigates the oxidative steam reforming (OSR) of simulated bio-oil aqueous fractions using Co/CeO2-SBA-15 catalysts. Five representative compounds – methanol, acetic acid, hydroxyacetone, phenol, and furfural – were evaluated to assess their reactivity for hydrogen... |
Hoja de cálculo MS Excel - 21,0 KB -
MD5: 4ab27432a7d54b4f4be5fbd2ada632d4
|
Texto plano - 8,6 KB -
MD5: e71fcb81632e2d9729ea79cbf1d1b84b
|
5 nov 2025
SANCHEZ DE ROJAS CANDELA, CARMEN; Riquelme Aguado, Ainhoa; Rodrigo Herrero, Pilar; Torres, B.; Rams, Joaquin, 2025, "Wear behavior of additively manufactured 316L/SiCp composites with up to 60 wt% SiCp", https://doi.org/10.21950/ERV4V7, e-cienciaDatos, V1
We studied the wear behavior of DED additively manufatured 316L/SiC composites reinforced with 20-80 wt.% of SiC ceramic particles and compared with 316L stainless Steel. The microstructure and microhardness of the samples were studied, and the friction coefficient, pin and disc... |
Datos tabulares - 3,7 KB
|
MS Powerpoint - 31,4 MB -
MD5: 06a0964e4ca21d3e7975796935b5a16f
|
Texto plano - 4,3 KB -
MD5: ce6aba0f53d6fed3cefe5d8caacf654f
|
MS Word - 16,5 KB -
MD5: 6eed39483f457aff2b867819783c15c5
|
5 nov 2025
Riquelme Aguado, Ainhoa; SANCHEZ DE ROJAS CANDELA, CARMEN; Rodrigo Herrero, Pilar; Rams, Joaquin, 2025, "Influence of process parameters in additive manufacturing of highly reinforced 316L / SiCp composites", https://doi.org/10.21950/7KFJGS, e-cienciaDatos, V1
We studied the influence of additive manufaturing process parameters such as laser power and scanning speed on the geometry, microstructure and hardness of 316L/SiC composites reinforced with 20-80 wt.% of reinforcement using Directed Laser Deposition. |
5 nov 2025 -
Influence of process parameters in additive manufacturing of highly reinforced 316L / SiCp composites
Hoja de cálculo MS Excel - 361,7 KB -
MD5: 9dd4fbd59903a6b36cea8f95503215c4
|
