Encuesta satisfacción e-cienciaDatos
e-cienciaDatos es el repositorio de datos de investigación de las universidades del Consorcio Madroño. Es miembro de Harvard Dataverse Network, aceptado por las principales editoriales científicas y cumple los requisitos del H2020.
Estamos comprometidos con la mejora de nuestro servicio. Conocer mejor sus expectativas nos ayudará a adaptar nuestros servicios a sus necesidades.
Si desea colaborar con nosotros, seleccione su institución para comenzar la encuesta.
Gracias por su colaboración.
21 a 30 de 247 Resultados
25 sept 2025 - Universidad Rey Juan Carlos
SANCHEZ DE ROJAS CANDELA, CARMEN; Ainhoa Riquelme; Rodrigo Herrero, Pilar; Rams, Joaquin, 2025, "Carrying Gas Influence and Fabrication Parameters Impact in 3D Manufacturing of In Situ TiN‑Ti Composites by Direct Laser Deposition", https://doi.org/10.21950/ZP1MS5, e-cienciaDatos, V1
We present the study of the relationship between the carrying gas (reactive or inert) and the process parameters of Direct Laser Deposition Additive Manufacturing in the manufacturing of Ti/TiN composite materiales. |
25 sept 2025 - Universidad Rey Juan Carlos
SANCHEZ DE ROJAS CANDELA, CARMEN; Riquelme, A.; Rodrigo Herrero, Pilar; Bonache, Victoria; Bedmar Sanz, Javier; Torres, B.; Rams, Joaquin, 2025, "A One-Step Novel Method to Fabricate Multigrade Ti6Al4V/TiN Composites Using Laser Powder Bed Fusion", https://doi.org/10.21950/3B0UYD, e-cienciaDatos, V1
We proposed a novel methodology to fabricate in one step a multigrade titanium matrix composite reinforced with in situ TiN and a proof-of-concept hip implant by incorporating nitrogen during the L-PBF (Laser powder bed fusion) process. |
25 sept 2025 - Universidad Rey Juan Carlos
Ainhoa; Rodrigo Herrero, Pilar; María Dolores Escalera; Escalera Rodríguez, Mª Dolores; Rams Ramos, Joaquín, 2025, "Wear Resistance of Aluminum Matrix Composites’ Coatings Added on AA6082 Aluminum Alloy by Laser Cladding", https://doi.org/10.21950/AM9QYC, e-cienciaDatos, V1
We present a study of wear resistance of Aluminum Matrix Composites’ Coatings Added on AA6082 Aluminum Alloy by Laser Cladding |
24 sept 2025 - Universidad Carlos III de Madrid
GARCIA CAMARA, BRAULIO, 2025, "All-Optical Nanosensor for Displacement Detection in Mechanical Applications", https://doi.org/10.21950/DA28LK, e-cienciaDatos, V1
In this Project, we propose the design of an optical system based on two parallel suspended silicon nanowires that support a range of optical resonances that efficiently confine and scatter light in the infrared range as the base of an all-optical displacement sensor. The effects... |
24 sept 2025 - Universidad Rey Juan Carlos
Vidal Duarte, Nora; VENTURA SANCHEZ-HORNEROS, MARIA; Fernando Martínez Castillejo; Melero, Juan Antonio, 2025, "Replication Data for MgO-based catalysts for selective delignification of lignocellulosic waste and carboxylic acids production under mild hydrothermal conditions", https://doi.org/10.21950/SGTY6W, e-cienciaDatos, V1
Lignocellulosic biomass offers a sustainable alternative to traditional raw materials. However, its complex structure, and particularly the presence of lignin, presents a significant challenge for its conversion into valuable products. This study explores the catalytic performanc... |
23 sept 2025 - Universidad Rey Juan Carlos
García Rodríguez, Sonia; Bedmar Sanz, Javier; ABU-WARDA, Najib; Torres, B.; Rams, Joaquin, 2025, "Influence of the surface state on the corrosion behavior of the 316 L stainless steel manufactured by laser powder bed fusion", https://doi.org/10.21950/ZAOIM3, e-cienciaDatos, V1
We present the study of the corrosion behavior and the comparison of 316L stainless Steel manufactured by LPBF as-built and grounded. |
23 sept 2025 - Universidad Rey Juan Carlos
García Rodríguez, Sonia; Bedmar Sanz, Javier; ABU-WARDA, Najib; Torres, B.; Rams, Joaquin; UTRILLA, M.V., 2025, "Impact of molten salts composition on the corrosion behavior of NiMoCr and CoNiCrAl coatings on L-PBF 316L stainless steel for CSP plants", https://doi.org/10.21950/ZDDDFZ, e-cienciaDatos, V1
We present the study of the influence of different coatings made by HVOF in 316 L stainless Steel manufactured by LPBF on the corrosión behavior. |
23 sept 2025 - Universidad Rey Juan Carlos
Bedmar Sanz, Javier; de la Pezuela, Jorge; Ainhoa; Torres, B.; Rams, Joaquin, 2025, "Impact of Remelting in the Microstructure and Corrosion Properties of the Ti6Al4V Fabricated by Selective Laser Melting", https://doi.org/10.21950/JRUIDH, e-cienciaDatos, V1
We present the study of the corrosion behavior of the Ti6Al4V alloy manufactured by LPBF with CO2 lasers using the remelting of layers strategies |
23 sept 2025 - Universidad Rey Juan Carlos
Bedmar Sanz, Javier; García Rodríguez, Sonia; Roldán Blanco, Marcelo; Torres, B.; Rams, Joaquin, 2025, "Effects of the heat treatment on the microstructure and corrosion behavior of 316 L stainless steel manufactured by Laser Powder Bed Fusion", https://doi.org/10.21950/Y1O400, e-cienciaDatos, V1
We present the study of the corrosion behavior of the 316L alloy manufactured by LPBF and treated with different heat treatments |
23 sept 2025 - Universidad Rey Juan Carlos
García Rodríguez, Sonia; Bedmar Sanz, Javier; ABU-WARDA, Najib; Torres, B.; Rams, Joaquin, 2025, "Effect of post-processing heat treatments on the high-temperature oxidation of additively manufactured 316L stainless steel", https://doi.org/10.21950/DPWBHA, e-cienciaDatos, V1
We present the study of the influence of different heat treatment in the high-temperature oxidation of the 316 L stainless Steel made by LPBF. |
