1 a 10 de 162 Resultados
10 dic 2025
Zarza-Hernandez, Marcos; Ardoy Cuadros, Juan; Sujar, Aaron; Winkovics, Helmuth; Mayoral-Fernandez Baillo, Daniel; DELGADO-GOMEZ, DAVID; Bayona, Sofia, 2025, "Dataset of Rational Mind: a serious videogame for cognitive restructuring", https://doi.org/10.21950/IAZGFF, e-cienciaDatos, V1
This dataset contains responses collected during a pilot study evaluating the effectiveness of Rational Mind, a serious videogame designed for cognitive restructuring, compared to self-monitoring in reducing automatic thoughts. The data include participants’ answers to two valida... |
1 dic 2025 - Green hydrogen production from waste biomass pyrolysis fractions by auto-thermal reforming in a membrane reactor BIOWASTETOH2
Calles Martín, Jose Antonio, 2025, "Towards a circular economy in electroless pore-plated Pd/PSS composite membranes: Pd recovery and porous support reuse", https://doi.org/10.21950/HK9GTB, e-cienciaDatos, V1
The project (BiowastetoH2) aims to contribute to the decarbonisation of the European energy system by producing green hydrogen from waste streams. This, the main objective of the project is the production of renewable hydrogen from residual streams from biomass pyrolysis by means... |
1 dic 2025 - Green hydrogen production from waste biomass pyrolysis fractions by auto-thermal reforming in a membrane reactor BIOWASTETOH2
Calles Martín, Jose Antonio, 2025, "Tailoring Pd-membranas prepared by continuous flowing electroless pore-plating:role of hydrazine concentration and solution Flow rate", https://doi.org/10.21950/4RBSLV, e-cienciaDatos, V1
This database includes all the data from figures included in the publication: "Tailoring Pd-membranas prepared by continuous flowing electroless pore-plating:role of hydrazine concentration and solution Flow rate" |
13 nov 2025 - Green hydrogen production from waste biomass pyrolysis fractions by auto-thermal reforming in a membrane reactor BIOWASTETOH2
MORENO DE LA CALLE, Alvaro; MEGIA, Pedro J.; Calles, Jose A; CARRERO, ALICIA; Vizcaíno, Arturo, 2027, "Shaped mesostructured Ni/CeO2 as active catalysts in hydrogen production from acetic acid oxidative steam reforming", https://doi.org/10.21950/DTGWBT, e-cienciaDatos, V1
Oxidative steam reforming (OSR) of acetic acid was carried out using shaped catalysts prepared by combining Ni supported on mesostructured ceria with various clays (kaolinite, sepiolite, attapulgite, and bentonite). Bentonite or attapulgite extrudates calcined with 1°C/min heatin... |
11 nov 2025 - Green hydrogen production from waste biomass pyrolysis fractions by auto-thermal reforming in a membrane reactor BIOWASTETOH2
Chirinos Chavez, Carlos Andres; Vizcaíno, Arturo; Calles, Jose A; CARRERO, ALICIA; MEGIA, Pedro J., 2027, "Valorization of bio-oil aqueous fractions through oxidative steam reforming over Co/CeO2-SBA-15 catalysts: from single model compounds to complex mixtures", https://doi.org/10.21950/LPVFCN, e-cienciaDatos, V1
This study investigates the oxidative steam reforming (OSR) of simulated bio-oil aqueous fractions using Co/CeO2-SBA-15 catalysts. Five representative compounds – methanol, acetic acid, hydroxyacetone, phenol, and furfural – were evaluated to assess their reactivity for hydrogen... |
5 nov 2025
SANCHEZ DE ROJAS CANDELA, CARMEN; Riquelme Aguado, Ainhoa; Rodrigo Herrero, Pilar; Torres, B.; Rams, Joaquin, 2025, "Wear behavior of additively manufactured 316L/SiCp composites with up to 60 wt% SiCp", https://doi.org/10.21950/ERV4V7, e-cienciaDatos, V1
We studied the wear behavior of DED additively manufatured 316L/SiC composites reinforced with 20-80 wt.% of SiC ceramic particles and compared with 316L stainless Steel. The microstructure and microhardness of the samples were studied, and the friction coefficient, pin and disc... |
5 nov 2025
Riquelme Aguado, Ainhoa; SANCHEZ DE ROJAS CANDELA, CARMEN; Rodrigo Herrero, Pilar; Rams, Joaquin, 2025, "Influence of process parameters in additive manufacturing of highly reinforced 316L / SiCp composites", https://doi.org/10.21950/7KFJGS, e-cienciaDatos, V1
We studied the influence of additive manufaturing process parameters such as laser power and scanning speed on the geometry, microstructure and hardness of 316L/SiC composites reinforced with 20-80 wt.% of reinforcement using Directed Laser Deposition. |
3 nov 2025
MANZANARES CADENAS, MARÍA JESÚS; Pérez-Marín, Diana; Pizarro, Celeste, 2025, "Validating a first educational training system to teach ScratchJr to neurotypical and neurodivergent children according to their preferences and needs", https://doi.org/10.21950/XP2SPQ, e-cienciaDatos, V1
Teaching programming to children at early age has been proven to be beneficial. Some research has focused on how to teach pro-gramming to children with special needs. According to Hu-man-Computer Interaction, all users should be involved in the design of their systems (including... |
27 oct 2025
Garcia Zapata, Juan Manuel; Torres, B.; Rams, Joaquin, 2025, "Synergization of LPBF shell‑infll lattice structures: experimental and modelling", https://doi.org/10.21950/LSHS4D, e-cienciaDatos, V1
This study aims to analyse the synergization between the shell and the lattice structure through compression testing and fnite element modelling (FEM), evaluating how diferent shell thicknesses and strut sizes contribute to the mechanical response of the integrated structures. Sh... |
27 oct 2025
Garcia Zapata, Juan Manuel; Torres, B.; Rams, Joaquin, 2025, "Effects of building direction, process parameters and border scanning on the mechanical properties of Laser Powder Bed Fusion AlSi10Mg", https://doi.org/10.21950/UENMQX, e-cienciaDatos, V1
In this study we present the analysis of the effect of building direction, process parameters and border scanning on the mechanical properties of LPBF manufactured AlSi10Mg alloy through hardness, tensile, shear and fracture testing. |
